Using a mini projector, you can project video and images from different sources onto a wall or screen. However, it may encounter some problems, such as being stuck on the logo screen, just like any other electronic device.

But why does the mini projector stuck on logo screen, and how to fix this issue?

This issue can occur due to various reasons, such as loose cable connections, faulty video cables, or cable extenders and inline devices interfering with the signal. To troubleshoot a mini projector stuck on the logo screen, check cable connections, use a different video cable, remove cable extenders/inline devices, and consult the user manual for the correct cable type and connection method.

In this article, we will discuss some troubleshooting steps to help you resolve this problem and enjoy uninterrupted entertainment. I am sure you don’t have to look further after reading this article!

Mini Projector Stuck on Logo Screen

Mini Projector Stuck on Logo Screen – Reasons

As I mentioned above, the reasons for “Mini Projector Stuck on Logo Screen” can include the following:

  • Loose cable connections
  • Faulty video cables
  • Cable extenders and inline devices interfering with the signal

Troubleshooting Steps for Mini Projector Stuck on Logo Screen

If you follow these steps, you should be able to fix the problem:

  • Check the Cable Connections
  • Use a Different Video Cable
  • Remove Cable Extenders and Inline Devices
  • Consult the Projector’s Specifications

Check the Cable Connections

One of the most common reasons for a mini projector getting stuck on the logo screen is loose cable connections. To resolve this issue, ensure that all the cables connecting the mini projector to the video source are securely attached. Make sure both ends of the cable are tightly connected. Loose connections can lead to signal loss and cause the projector to get stuck on the logo screen.

Use a Different Video Cable

If the issue persists after checking the cable connections, try using a different, known working video cable. Faulty video cables can prevent the image from the video source from reaching the projector. Using a different cable can help to rule out a faulty cable as the cause of the issue.

Remove Cable Extenders and Inline Devices

Cable extenders, inline devices, and long cables can cause signal degradation, which may result in the mini projector getting stuck on the logo screen. If you are using a cable extender or an inline device, remove them and use a cable no longer than 22 feet (7 meters) to connect the video source directly to the projector. This should help to ensure a strong and clear signal between the video source and the mini projector.

Consult the Projector’s Specifications

Refer to the mini projector’s user manual or specifications to ensure that you are using the correct cable type, length, and connection method. Using incompatible cables or connections can cause the projector to malfunction. Make sure that you are using the appropriate cable for your mini projector to ensure proper setup and configuration.

Additional Troubleshooting Tips for Mini Projector Stuck on Logo Screen

Mini Projector

Here are some additional troubleshooting tips for a mini projector stuck on the logo screen:

  • Perform a Factory Reset
  • Update the Projector’s Firmware
  • Contact Customer Support

Perform a Factory Reset

Resetting the mini projector to its factory default settings can often fix software issues and clear any system glitches that may be causing the projector to get stuck on the logo screen. 

The following steps will guide you through a factory reset:

  • Press the menu button on either the projector or the remote control.
  • Navigate to the Advanced Settings option.
  • Find and select the option to restore factory default settings.

Note: Some mini projector models may have the reset option in a slightly different location or under a different name. You can reset your mini projector by following the instructions in your projector’s manual.

Update the Projector’s Firmware

Outdated firmware can sometimes cause a mini projector to malfunction and get stuck on the logo screen. See if your projector manufacturer offers firmware updates for your specific model. In general, updating the firmware involves the following steps:

  • Visit the manufacturer’s website to download the most recent firmware update file.
  • Unzip the download and locate the firmware update file, which will likely have an extension like .img or .bin.
  • Load the firmware update file onto a USB flash drive.
  • Connect the USB drive to the mini projector’s USB port.
  • Power on the projector. The update should automatically start. If not, check the user manual for instructions to start the update process.
  • Wait for the update to complete. The projector will restart once the update is done.

Contact Customer Support

If the factory reset and firmware update do not resolve the issue, contact the mini projector manufacturer’s customer support for further help. It is important to provide the model number, serial number, and details about the problem with the projector. A support team member can help you troubleshoot further or suggest repair options if the problem is with the hardware.

Conclusion

A mini projector stuck on the logo screen can be a frustrating issue, but there are several troubleshooting steps that can help resolve the problem. Loose cable connections, faulty video cables, and cable extenders or inline devices interfering with the signal are common causes of this issue.

If you check cable connections, use a different video cable, remove cable extenders/inline devices, perform a factory reset, update the firmware, or contact customer support, you can successfully troubleshoot and fix the problem. Remember to consult the user manual and follow the correct cable type, length, and connection method to ensure proper setup and configuration.

Frequently Asked Questions

How Do I Reset My LG Mini Projector?

You can initiate a factory hard reset on your LG projector by pressing and holding the Volume Down Key as well as the Power/Lock Key simultaneously. Once displayed, you may release the keys. To proceed with the reset, press the Power/Lock Key. Alternatively, if you wish to cancel the reset, press the Volume Keys.

How Do I Reset My Mini DLP Projector?

To reset your DLP projector to its original factory settings, start by pressing the Menu button. Then, use the black arrow keys to move over to the Installation II option. Next, press the down arrow key and continue scrolling until you see the Factory Reset option. Finally, press the Select button located in the center of the arrow keys to confirm your selection.

How Do I Know If My Projector Bulb Is Bad?

Projector lamps using high-pressure mercury and xenon do not simply burn out when they run out of energy. Instead, these bulbs gradually decrease in brightness over time. When the lamp is emitting only about 50% of its original light output, it is necessary to replace it with a new one.

Is It OK to Leave a Projector in Standby Mode?

Leaving an electronic device in standby mode for an extended period will not cause any harm to it. This mode simply means the device is not actively in use and is waiting to be powered on. While in standby mode, the device consumes a minimal amount of electricity, similar to being powered off.

Sources:

Fernando Shrader

Hey, It’s me, Fernando Shrader. I’m the creator of this website. You might wonder why I’ve created this blog and what’s the difference between Visual Finds and other online blogs. As a professional technician working for the last 8 years with projectors, I though this is the right time to share what I’ve learned in this journey with an online audience so they can see what I’m doing and how they can solve their problems! Happy Learning!